推薦新聞
脫輕胺型RTV一1硅烷改性聚氨酯密封膠的...
單組分聚氨酯密封膠具有優異的耐高低溫性能
面漆與硅烷改性聚氨酯密封膠“濕碰濕”涂裝...
丁基防水嵌縫膠材料的選擇及工藝流程的確定
“圓柱”型硅烷改性聚氨酯密封膠密封性能試驗
- 發布時間 : 2025-1-12 11:22:45
- Views:
(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.
“圓柱”型硅烷改性聚氨酯密封膠密封性能試驗
(Summary description)Customized SILICONE STRUCTURAL SEALANT from China manufacturer refers to the adhesive with high strength, can bear large load, aging resistance, fatigue resistance and corrosion resistance, and has stable performance within the expected life. It is suitable for bearing the bonding of strong structural parts. Non structural adhesive has low strength and poor durability. It can only be used for bonding, sealing and fixing of ordinary and temporary properties, and cannot be used for structural adhesive bonding. NEUTRAL SILICONE WETHERPROOF SEALANT from China manufacturer is a structural adhesive with waterproof function. Silicone glue refers to the adhesive based on silicone rubber. According to different functions, it can be divided into structural adhesive, potting adhesive, sealant, thermal conductive adhesive, flame retardant adhesive and so on.
- 發布時間 : 2025-1-12 11:22:45
- Views:
針對傳統卡瓦式井下節流器的“圓柱”式硅烷改性聚氨酯密封膠存在可靠性差、壽命短的問題,進行了大量的室內研究實驗。結合長慶油田現場實際,開展了井下節流器密封硅烷改性聚氨酯密封膠性能研究,研制出“V"型結構的硅烷改性聚氨酯密封膠,提高了井下節流器的工作可靠性及使用壽命。
在進行井下節流技術配套應用研究試驗過程中,針對卡瓦式井下節流器存在可靠性差、壽命短的問題,進行了大量的室內研究實驗,通過開展井下節流器密封硅烷改性聚氨酯密封膠性能的專題研究,研制出“V”型結構的硅烷改性聚氨酯密封膠,既提高了井下節流器的工作可靠性,同時也延長卡瓦式井下節流器的使用壽命。
卡瓦式井下節流器原來采用“圓柱”型硅烷改性聚氨酯密封膠,其局部結構如圖1所示。油管主體上硅烷改性聚氨酯密封膠下硅烷改性聚氨酯密封膠錐套井下節流器局部結構示意圖從應用情況來看,卡瓦式井下節流器采用“圓柱”型硅烷改性聚氨酯密封膠,在有些井密封壽命較短。對18井次進行統計,結果為最長有效期493 d,最短有效期27 d,平均有效期213 d。井內取出的硅烷改性聚氨酯密封膠多數從根部損壞。
為了優化完善卡瓦式井下節流器性能,提高其對不同工作條件的適應性,延長工作有效期,開展了密封性能室內試驗研究。
卡瓦式井下節流器室內試驗裝置如圖2所示。該裝置主要由1/2"短節、彎頭、擋帽、們3 mm油管短節、油管接箍、們3 mm油管彎頭(閥門、壓力表)、變扣接頭、截止閥、1/2"短節等組成。配有加熱保溫系統、溫度檢測系統、溫度調節節流系統。可以方便地進行常溫、高溫條件下井下節流器的坐封性能、密封性能試驗,既可進行水壓試驗,也可進行氣壓試驗。http://www.www.sunsage.net/
Scan the QR code to read on your phone
